FluoroSeal®️ coated ball valves offer direct flow, providing positive shutoff with minimal pressure drops and flow turbulence.
Since the ball is independent of the stem, it has a certain freedom of movement along the axis of the valve in the closed position, without rotating against the stem. When line pressure is applied to the closed ball, it moves slightly downstream to maintain contact with the downstream seat, where the primary seal occurs.
Lined ball valves can generally be installed regardless of flow direction and are ideal for automation and flow control as they feature an ISO mounting plate.
FluoroSeal's fully PFA lined standard ball valve uses a ductile iron housing with stainless steel ball cores and stem. being ideal for corrosive liquid applications.
Available sizes
½» – 6″ / DN 15 – DN 150
Pressure classes
ASME Clase 150 / PN10-16
The main features are:
▪️LOW EMISSIONS STEM SEAL
FluoroSeal lined ball valves feature very low fugitive emissions due to the use of fully adjustable, pre-compressed PTFE packing rings.
-Independent test data according to ISO 15848-1 shows an average fugitive emissions rate of less than 10 ppm
▪️FULL PASS DESIGN
▪️UPPER SEAT DESIGN
All FluoroSeal coated ball valves come standard with the high-performance self-compensating GF2P (second generation PTFE) seat.
▪️COATING
The coating is virgin PFA without pigmentation, which allows the valves to be used in food services and other applications that require high purity.
▪️ANTI EXPLOSION STEM
The fully FluoroSeal coated ball valve stem design prevents stem bursting even if the gland assembly is removed.
▪️STANDARDIZED ACTUATOR ASSEMBLY ACCORDING TO 𝗜𝗦𝗢 𝟱𝟮𝟭𝟭
▪️ANTISTATIC DESIGN
